- Description
- Parameters and character
- Inquiry
This power unit is designed exclusively for small tipper, consist・ing of high pressure gear pump, DC motor, multi-functional manifold,valves and tank, etc. The hand pump with a displacement of 8cc perstroke works as a backup power souce of lifiting the tipper in case ofpower failure with the lowering movement is activated by the solenoidvalve.
Special Notes
1 .This power unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all the hydraulic parts concerned before mounting the power unit
3. Viscosity of the hydrciulic oil shoud he 15-68 cst,which should also be clean and free of impurities.N46 hydraulic oil is recommended.
4. This power unit should be mounted vertically.
5. Check the oil level in the tank after the first star of the power unit.
6.Oil changing is required after the initial 100 operation hours,after-wards once every 3000 hours.
Outline Dimension
Parameters and character
| Model | Motor Volt | Motor power | Nominal Speed | Displaceme nt | System Pressure | Tank Capacity | Solenoid Valve Volt | L(mm) |
| YBZ5-F2.1E1W27/WUCAT1 | 12VDC | 1.5KW | 2.1ml/r | 20MPa | 12L | 12VDC | 559 | |
| Y8Z5-F2.1H1W27/WUCAT1 | 2500RPM | 20L | 791 | |||||
| YBZ5-F2.5E2A27/WUCBT1 | 24VDC | 2.0KW | 2.5ml/r | 18MPa | 12L | 24VDC | 559 | |
| YBZ5-F2.7H2A27AA/UCBT1 | 2.7ml/r | 20L | 791 |
Inquiry
