- Description
- Parameters and character
- Inquiry
This power unit is designed exclusively for small and medium lift table, which consists of high pressure gear pump,AC motor, multifunctional manifold,valves, tank,etc. The lowering movement is acti- vated by the solenoid valve with the speed controlled by the balance valve.
Special Notes
1. The power unit is of S3 duty, which can only be worked intermittently, ie., Iminute on and 9 minutes off.
2. Clean all the hydraulic parts concerned before mounting the power unit
3. Viscosity of the hydraulic oil shoud be 15-68 cst.which should also be clean and free of impurities.N46 hydraulic oil is recommended.
4. Oil changing is required after the initiaM 00 operation hours, afterwards once every 3000 hours.
5. The power unit should be mounted horizontally.
Outline Dimension
Parameters and character
| Model | Motor Volt | Motor Power | Rated Speed | Displacement | System Pressure | Tank Capacity | Solenoid Valve Volt | L(mm) |
| YB25-F1.6B3G2/LCAAD1 | 220VAC | 1.5KW | 2850 RPM | 1.6ml/r | 20MPa | 6L | 12VDC | 629 |
| YBZ5-E2.1B3G2/LCABD1 | 2.1ml/r | 16MPa | 6L | 24VDC | 629 | |||
| YBZ5-D2.5C3G2/LCACD1 | 2.5ml/r | 12MPa | 8L | 24VAC | 699 | |||
| YBZ5-F2.1C4H2/LCADD1 | 380VAC | 2.2KW | 2.1ml/r | 20MPa | 8L | 110VAC | ||
| YBZ5-E2.5D4H2/LCAED1 | 2.5ml/r | 16MPa | 10L | 220VAC | 769 | |||
| VBZ5-E2.7E4H2/LCAED1 | 2.7ml/r | 15MPa | 12L | 220VAC | 869 |
Inquiry
