- Description
- Parameters and character
- Inquiry
With a typical power up gravity down circuit,this powerunit is designed exclusively for those auto lifts requiring alow noise level.The lowering movement is controlled by thesolenoid release valve,with the lowing speed regulated bythe adjustable pressure compensated flow control valve.
Special Notes
1. The DC motor is of S3 duty cycle, which can only work intermittently and repeatedly, ie., 1 minute on and 9 minutes off.
2. Clean all the hydraulic parts concerned before mounting the power unit.
3. Viscosity of the oil shoud be 15-68 cst.and the oil should be clean and free of impurities,N46 hydraulic oil is recommended .
4. The power unit should be mounted vertically.
5. Check the oil level in the tank after the initial running of the power unit.
6.0il changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
Outline Dimension
Parameters and character
| Model | Motor Volt | Motor Power | Rated Speed | Displacement | System Pressure | Tank Capacity | Solenoid Valve Volt | Total Length | |
| L1(mm) | L(mm) | ||||||||
| YBZ5-G3.2D4H2/TBTIT1 | 380VAC | 2.2KW | 1450RPM | 3.2ml/r | 25MPa | 10L | 24VDC | 475 | 797 |
| YBZ5-G3.7D4H2/TBTIT1 | 3.7ml/r | 8L | 415 | 737 | |||||
| YBZ5-F4.2C4H2/TBTIT1 | 4.2ml/r | 22MPa | 8L | 415 | 737 | ||||
| VBZ5-F4.2D4H2/TBTIT1 | 10L | 475 | 797 | ||||||
| YBZ5-F5D4H2/TBTIT1 | 5ml/r | 10L | 24VDC | 475 | 797 | ||||
| YBZ5-F5E4H2/TBTIT1 | 12L | 540 | 862 | ||||||
| YBZ5-G3.2D3H2n_BTIT1 | 220VAC | 3.2ml/r | 25MPa | 10L | 475 | 797 | |||
| YBZ5-G3.7D3H2/TBTIT1 | 3.7ml/r | 8L | 415 | 737 | |||||
| YBZ5-F4.2C3H2HBTIT1 | 4.2ml/r | 22MPa | 8L | 220VAC | 415 | 737 | |||
| YBZ5-F4.2D3H2/TBTIT1 | 10L | 475 | 797 | ||||||
| VB25-F5D3H2/TBTIT1 | 5ml/r | 10L | 475 | 797 | |||||
| YBZ5-F5E4H2/TBTIT1 | 12L | 540 | 862 | ||||||
Inquiry
