- Параметрҳо ва аломат
- пурсиш
This power unit is designed exclusively for the large lift table, Consistingof high pressure gear pump, AC motor, multi-functional manifold, valves,tank,ect. The lowering movement is actived by the solenoid valve and the speed controlled by the adjustable throttle valve. When the lift rises to a high positoin,but the power supply is cut, the lowering movement is controlled by the manual override function.
Ёддоштҳои махсус
1 .This power unit is of S3 duty cycle,which can only workintermittently and repeatedly, i.e., 1 minute on and 9 minutes off.
2. Пеш аз васл кардани блок, ҳамаи қисмҳои гидравликии марбутаро тоза кунед.
3. Viscosity of the oil shoud be 15-68 cst.which should also be clean and free of impurities.N46 hydraulic oil is recommended.
4.Oil changing is required after the initial 100 operation hours,afterwards once every 3000 hours.
5.The power unit should be mounted vertically.
Маблағи андоза
Pпараметрҳо ва аломат
намуна |
Volt Volt |
Қувваи барқ |
Суръати номбаршуда |
Бозгашт |
Бузургии система |
иқтидори зарфи |
Solenoid Vavlve Volt |
YBZ5-E8L4J2/TCDBT1 |
380VAC |
4KW |
2850RPM |
8.08ml / r |
16MPa |
50L |
24VDC |
YBZ5-D8L4J2HCDAT1 |
10MPa |
12VDC |
|||||
YBZ5-C8L4J2/TCDCT1 |
6.3MPa |
24VAC |