+ 86-18761016003

Pogonska enota za paletni viličar

Tukaj ste : O NAS >Izdelek >Hidravlični agregati >Pogonska enota za paletni viličar

  • /img/pallet_truck_power_unit2.jpg

Pogonska enota za paletni voziček2

  • Opis
  • Parametri in znak
  • Povpraševanje

Consisting of high pressure gear pump,Low noise DC motor,multi-functional manifold,valves,tank,ect. This power unit can be widely used in the industry of logistic devices such as minifork lift ect.The lowering movement is controlled by the solenoid valve with the speed controlled by the balance valve.

Posebne opombe

1 .This power unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.

2. Clean all the hydraulic parts concerned before mounting the power unit

3. Viscosity of the hydrciulic oil shoud he 15-68 cst,which should also be clean and free of impurities.N46 hydraulic oil is recommended.

4. Ta napajalna enota mora biti nameščena navpično.

5. Preverite nivo olja v rezervoarju za prvo zvezdo pogonske enote.

6. Menjava olja je potrebna po začetnih 100 delovnih urah, naknadno enkrat na 3000 ur.

Obrisna dimenzija

Parametri in značaj

Model

Volt motorja

Motorna moč

Nominalna hitrost

Prostornina

Sistemski pritisk

Tank Kapaciteta

Elektromagnetni ventil Volt

L (mm)

YBZ5-E0.5W1T2/UVTAP2

12VDC

0.8KW

3500RPM

0.5 ml / r

16MPa

1L

12VDC

308

YBZ5-E0.63W1T2/UVTAP2

0.63 ml / r

YBZ5-E0.5Y2T2/UVTBP2

24VDC

0.5 ml / r

24VDC

YBZ5-E0.75Y2T2/UVTBP2

0.75 ml / r

YBZ5-E1.0W2T2/UVTBP2

1.0 ml / r

Ipovpraševanje
  

PRIJAVITE SE IN PRIHRANITE!Ekskluzivne ponudbe po e-pošti in posebne ponudbe z omejenim časovnim popustom

Povpraševalna košara