+ 86-18761016003

Pogonska enota za paletni viličar

Tukaj ste : Domov >Izdelek >Hidravlični agregati >Pogonska enota za paletni viličar

  • /img/pallet_truck_power_unit1.jpg

Pogonska enota za paletni voziček1

  • Opis
  • Parametri in znak
  • Povpraševanje

Consisting of high pressure gear pump丄ow noise DC motor,multi-functional manifold,valves,tank,ect. This power unit can be widely used in the industry of logistic devices such as minifork lift ect.The lowering movement is controlled by the solenoid valve with the speed controlled by the balanee valve.

Posebne opombe

1. The power unit is of S3 duty, which can only work intermit-tently and repeatedly,ie., 1 minute on and 9 minutes off.

2. Clean all the hydraulic parts concerned before mounting thepower unit.

3. Viscosity of the hydraulic oil shoud be 15~68 cst,which should also be clean and free of impurities.N46 hydraulic oil is recomme nded.

4. Ta napajalna enota mora biti nameščena navpično.

5. Check the oil level in the tank after the first star of the power unit.

6.Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.

Obrisna dimenzija

Parametri in značaj

Model

Volt motorja

Motorna moč

Nominalna hitrost

Prostornina

Sistemski pritisk

Tank Kapaciteta

Elektromagnetni ventil Volt

L (mm)

YBZ5-E0.5W1T2/VUSAP1

12VDC

0.8KW

3500RPM

0.5 ml / r

16MPa

1L

12VDC

307

YBZ5-E0.63W1T2A/USAP1

0.63 ml / r

VBZ5-E0.5Y2T2/VUSBP1

24VDC

0.5 ml / r

1.5L

24VDC

337

YBZ5-E0.63Y2T2/VUSBP1

0.63 ml / r

YBZ5-E0.75W2T2A/USIP2

0.75 ml / r

1L

307

Ipovpraševanje
  

PRIJAVITE SE IN PRIHRANITE!Ekskluzivne ponudbe po e-pošti in posebne ponudbe z omejenim časovnim popustom

Povpraševalna košara