+ 86-18761016003

Dvižna miza Napajalna enota

Tukaj ste : Domov >Izdelek >Hidravlični agregati >Dvižna miza Napajalna enota

  • /img/lift_table_power_unit5.jpg

Dvižna miza Napajalna enota

  • Opis
  • Parametri in znak
  • Povpraševanje

This power unit is designed exclusively for the large-lift table. Consisting of high pressure gear pump, AC motor, multi-functional manifold, valves.tank, ect.The lowing movement is activated by the solenoid valve and the speed controlled by the adjustable throttle valve.

Posebne opombe

1. The power unit is of S3 duty, which can only work intermit-tently and repeatedly,ie., 1 minute on and 9 minutes off.

2. Pred namestitvijo pogonske enote očistite vse zadevne hidravlične dele.

3. The viscosity of the oil shoud be 15-68 cst.and the oil should be clean and free of impurities,N46 recommended hydraulic oil.

4. Change the oil after the first 100 hours of using the power unit, then change the oil every 3000 hours.

5. The power unit should be mounted vertically.

Obrisna dimenzija

Parametri in značaj

Model

Volt motorja

Motorna moč

Nazivna hitrost

Prostornina

Sistemski pritisk

Tank Kapaciteta

Elektromagnetni ventil Volt

LPU-E15P4J2ZTKDAZ1

380VAC

4KW

1450 RPM

15 ml / r

16MPa

80L

12VDC

LPU-E15P4K2/TKDBZ1

5.5KW

15 ml / r

16MPa

24VDC

LPU-E23P4K2/TKDDZ1

23mll/r

14MPa

110VAC

LPU-D28P4K2/TKDEZ1

28 ml / r

12MPa

220VAC

Ipovpraševanje
  

PRIJAVITE SE IN PRIHRANITE!Ekskluzivne ponudbe po e-pošti in posebne ponudbe z omejenim časovnim popustom

Povpraševalna košara