+ 86-18761016003

Avtomatska dvižna enota

Tukaj ste : Domov >Izdelek >Hidravlični agregati >Avtomatska dvižna enota

  • /img/auto_hoist_power_unit3.jpg

Avtomatska dvižna enota3

  • Opis
  • Parametri in znak
  • Povpraševanje

This power unit is designed exclusively for Auto hoist,with power up,gravity down function.Start the motor to liftthe machine,the lowering movement is controlled by thesolenoid release valves.Each solenoid valve provides aseperate lowering speed.

Posebne opombe

1. The power unit is of S3 duty, which can only work intermittently and repeatedly,ie., 1 minute on and 9 minutes off.

2. Pred namestitvijo pogonske enote očistite vse zadevne hidravlične dele.

3. Viscosity of the hydraulic oil shoud be 15-68 cst,which should also be clean and free of impurities.N46 hydraulic oil is recommended.

4. This power unit should be mounted vertically.

5. Check the oil level in the tank after the initial operation of the power unit. 6.0il changing is required after the initial 100 operation hours,afterwards once every 3000 hours.

7.we are at your disposal to offer you the power units with your favorate power, flow, pressure as well as the tank capacity.

Obrisna dimenzija

Parametri in značaj

Model

Volt motorja

Motorna moč

Nazivna hitrost

Prostornina

Sistemski pritisk

Tank Kapaciteta

Elektromagnetni ventil Volt

YBZ5-F2.7D4H202/ACQIT1

220VAC

2.2KW

2800RPM

2.7 ml / r

20MPa

10L

24VDC

YBZ5-F2.7D4H202/ACDIT1

YBZ5-F3.2D3H202/LCQIT1

220VAC

3.2 ml / r

16MPa

VBZ5-F2.7D2B202/XVQIT1

24VDC

3KW

3450RPM

2.7 ml / r

20MPa

Ipovpraševanje
  

PRIJAVITE SE IN PRIHRANITE!Ekskluzivne ponudbe po e-pošti in posebne ponudbe z omejenim časovnim popustom

Povpraševalna košara