+86-18761016003

Unidades de força para elevador com tesoura dupla

Você está aqui : Pagina Inicial >Produto >Unidades de energia hidráulica >Unidades de força para elevador com tesoura dupla

  • /img/power_unit_for_double_scissors_lift2.jpg

Unidade de força para elevador de tesoura duplo 2

  • Descrição
  • Parâmetros e caráter
  • inquérito

Equipped with the zero leakage double-check solenoid valves,this power unit fulfils the completeseparation of the two independent circuits,which are respectively for the main platform and subordinateplatform of the double scissors lift Four cut-off valves are used for emergency oil return in case of powerfailure.By increasing the number of the solenoid vavles,it is easy to get more independent circuits andto control the corresponding cylinders.

Notas especiais

1.The power unit is of S3 duty,which can only work intermittentlyand repeatedly,ie,1minute on and 9 minutes off.

2.Clean all the hydraulic parts concerned before mounting thepower unit.

3.Viscosity of the hydraulic oil shoud be 15-68 cst,which shouldalso be clean and free of impurities.N46 hydraulic oil isrecommended.ee of impurities,N46 recommended hydraulic oil.

4.This power unit should be mounted verticaly.

5Check the oil level in the tank after the initial operation of thepower unit.6.Oil changing is required after the initial 100 operation hours,aterwards once every 3000 hours.

Dimensão contorno

Pparâmetros e caráter

Modelo

Motor Volt

Potência do motor

Velocidade avaliado

Deslocamento

Pressão do sistema

Capacidade do tanque

Solenoid Valve Voit

YBZ5-G2.1J3H30E/MCDBN2

220VAC

2.2KW

2800RPM

2.1ml / r

25MPa

25L

24VDC

YBZ5-G2.1J3H30E/MCDBN2

380VAC

2.5ml / r

220VAC

IInquérito
  

Inscreva-se e economize!Ofertas exclusivas por e-mail e promoções com descontos por tempo limitado

Cesta de inquérito
vazioinquérito