+ 86-18761016003

د لفټ میز بریښنا واحد

تاسو دلته یاست : کور >د محصول د >د هیدرولیک بریښنا واحدونه >د لفټ میز بریښنا واحد

  • /img/lift_table_power_unit4.jpg

د لفټ میز بریښنا واحد 4

  • Description
  • پارامترونه او کرکټرونه
  • د پوښتنې

This power unit is designed exclusively for the large lift table, Consistingof high pressure gear pump, AC motor, multi-functional manifold, valves,tank,ect. The lowering movement is actived by the solenoid valve and the speed controlled by the adjustable throttle valve. When the lift rises to a high positoin,but the power supply is cut, the lowering movement is controlled by the manual override function.

ځانګړي یادونه

1 .This power unit is of S3 duty cycle,which can only workintermittently and repeatedly, i.e., 1 minute on and 9 minutes off.

2. د بریښنا واحد نصبولو دمخه ټول اړونده هیدرولیک برخې پاک کړئ.

3. Viscosity of the oil shoud be 15-68 cst.which should also be clean and free of impurities.N46 hydraulic oil is recommended.

4.Oil changing is required after the initial 100 operation hours,afterwards once every 3000 hours.

5.The power unit should be mounted vertically.

 

د غځېدو ابعاد

Pآرامیټرونه او کرکټرونه

نمونه

د موټرو ولټ

د بریښنا ځواک

ټاکل شوی سرعت

بې ځایه کیدل

د سیسټم فشار

ټانک د ظرفیت

Solenoid Vavlve Volt

YBZ5-E8L4J2/TCDBT1

380VAC

4KW

2850RPM

8.08ml/r

16MPa

50L

24VDC

YBZ5-D8L4J2HCDAT1

10MPa

12VDC

YBZ5-C8L4J2/TCDCT1

6.3MPa

24VAC

Iضربه
  

لاسليک او خوندي کړئ!ځانګړي بریښنالیک وړاندیزونه او د محدود وخت رعایت ځانګړي