- Parametri u karattru
- Inkjesta
Equipped with two zero leakage double-check solenoid valves, this power unit has two independent circuits for the lifting cylinder and rotating cylinder of tailgate of electrical garbage truck. The lowering speed of the cylinders is regulated by the pressure compensated flow valve in the return line. This power unit can also be used in those applications where two separated hydraulic circuits are needed such as double scissors lift, doublepallet mover etc.
Noti Speċjali
1. The duty of this power unit is S3, i.e., 30 seconds on and 270 seconds off.
2. Naddaf il-partijiet idrawliċi kollha kkonċernati qabel ma twaħħal il-power unit.
3. Viscosity of the oil shoud be 15-68 cst, and the oil should be clean and free of impurities, N46 hydraulic oil is recommended .
4. This power unit should be mounted horizontally.
5. Check the oil level in the tank after the initial run of the power unit.
6. It-tibdil taż-żejt huwa meħtieġ wara l-100 siegħa operattiva inizjali, wara darba kull 3000 siegħa.
Daqs Dimensjoni
Parametri u karattru
mudell |
Volt tal-Mutur |
Motor Power |
Veloċità Nominali |
Displacement |
Pressjoni tas-Sistema |
tank Kapaċità |
YBZ5-D1.6A9A30/WUCTT2 |
48VDC |
2KW |
2500RPM |
1.6ml / r |
12MPa |
3L |