- Parametri u karattru
- Inkjesta
Consisting of high pressure gear pump丄ow noise DC motor,multi-functional manifold,valves,tank,ect. This power unit can be widely used in the industry of logistic devices such as minifork lift ect.The lowering movement is controlled by the solenoid valve with the speed controlled by the balanee valve.
Noti Speċjali
1. The power unit is of S3 duty, which can only work intermit-tently and repeatedly,ie., 1 minute on and 9 minutes off.
2. Clean all the hydraulic parts concerned before mounting thepower unit.
3. Viscosity of the hydraulic oil shoud be 15~68 cst,which should also be clean and free of impurities.N46 hydraulic oil is recomme nded.
4. Din l-unità tal-enerġija għandha tkun immuntata vertikalment.
5. Iċċekkja l-livell taż-żejt fit-tank wara l-ewwel stilla tal-power unit.
6.Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
Daqs Dimensjoni
Parametri u karattru
mudell |
Volt tal-Mutur |
Motor Power |
Veloċità Nominali |
Displacement |
Pressjoni tas-Sistema |
tank Kapaċità |
Volt tal-Valv tas-Solenojd |
L (mm) |
YBZ5-E0.5W1T2/VUSAP1 |
12VDC |
0.8KW |
3500RPM |
0.5ml / r |
16MPa |
1L |
12VDC |
307 |
YBZ5-E0.63W1T2A/USAP1 |
0.63ml / r |
|||||||
VBZ5-E0.5Y2T2/VUSBP1 |
24VDC |
0.5ml / r |
1.5L |
24VDC |
337 |
|||
YBZ5-E0.63Y2T2/VUSBP1 |
0.63ml / r |
|||||||
YBZ5-E0.75W2T2A/USIP2 |
0.75ml / r |
1L |
307 |