+ 86-18761016003

Unità tal-Qawwa tal-Mejda tal-Lift

Inti qiegħed hawn : home >prodott >Unitajiet tal-Enerġija Idrawlika >Unità tal-Qawwa tal-Mejda tal-Lift

  • /img/lift_table_power_unit5.jpg

Unità tal-Qawwa tal-Mejda tal-Lift

  • deskrizzjoni
  • Parametri u karattru
  • Inkjesta

This power unit is designed exclusively for the large-lift table. Consisting of high pressure gear pump, AC motor, multi-functional manifold, valves.tank, ect.The lowing movement is activated by the solenoid valve and the speed controlled by the adjustable throttle valve.

Noti Speċjali

1. The power unit is of S3 duty, which can only work intermit-tently and repeatedly,ie., 1 minute on and 9 minutes off.

2. Clean all the hydraulic parts concerned before mounting the power unit.

3. The viscosity of the oil shoud be 15-68 cst.and the oil should be clean and free of impurities,N46 recommended hydraulic oil.

4. Change the oil after the first 100 hours of using the power unit, then change the oil every 3000 hours.

5. The power unit should be mounted vertically.

Daqs Dimensjoni

Parametri u karattru

mudell

Volt tal-Mutur

Motor Power

Veloċità Rated

Displacement

Pressjoni tas-Sistema

tank Kapaċità

Volt tal-Valv tas-Solenojd

LPU-E15P4J2ZTKDAZ1

380VAC

4KW

1450 RPM

15ml / r

16MPa

80L

12VDC

LPU-E15P4K2/TKDBZ1

5.5KW

15ml / r

16MPa

24VDC

LPU-E23P4K2/TKDDZ1

23mll/r

14MPa

110VAC

LPU-D28P4K2/TKDEZ1

28ml / r

12MPa

220VAC

Iinkjesta
  

ISKRIŻA U Tiffranka!Offerti bl-email esklussivi & skonti ta 'żmien limitat

Qoffa ta 'inkjesta