Unità tal-Qawwa tal-Mejda tal-Lift

deskrizzjoni
Parametri u karattru
Inkjesta

This power unit is designed exclusively for small and medium lift table, which consists of high pressure gear pump,AC motor, multifunctional manifold,valves, tank,etc. The lowering movement is acti- vated by the solenoid valve with the speed controlled by the balance valve.

Noti Speċjali

1. The power unit is of S3 duty, which can only be worked intermittently, ie., Iminute on and 9 minutes off.

2. Naddaf il-partijiet idrawliċi kollha kkonċernati qabel ma twaħħal il-power unit

3. Il-viskożità taż-żejt idrawliku għandha tkun 15-68 cst.li għandha wkoll tkun nadifa u ħielsa minn impuritajiet. Żejt idrawliku N46 huwa rakkomandat.

4. Oil changing is required after the initiaM 00 operation hours, afterwards once every 3000 hours.

5. L-unità tal-enerġija għandha tkun immuntata orizzontalment.

Daqs Dimensjoni

Parametri u karattru

mudell	Volt tal-Mutur	Motor Power	Veloċità Rated	Displacement	Pressjoni tas-Sistema	tank Kapaċità	Volt tal-Valv tas-Solenojd	L (mm)
YB25-F1.6B3G2/LCAAD1	220VAC	1.5KW	2850 RPM	1.6ml / r	20MPa	6L	12VDC	629
YBZ5-E2.1B3G2/LCABD1				2.1ml / r	16MPa	6L	24VDC	629
YBZ5-D2.5C3G2/LCACD1				2.5ml / r	12MPa	8L	24VAC	699
YBZ5-F2.1C4H2/LCADD1	380VAC	2.2KW		2.1ml / r	20MPa	8L	110VAC	699
YBZ5-E2.5D4H2/LCAED1				2.5ml / r	16MPa	10L	220VAC	769
VBZ5-E2.7E4H2/LCAED1				2.7ml / r	15MPa	12L	220VAC	869