- Tawhā me te huru
- Inquiry
This power unit offers a higher safety level withtwo groups of check valves and solenoid release valves.Two different lowering speeds are achieved by energiz-ing/de-energizing the third solenoid valve during the low-ering process.
He Pukapuka Motuhake
1. Ko te mahi S3 te wae hiko, ka taea anake te mahi mokowhiti me te haere tonu, ara, 1meneti me te 9 meneti ka mutu.
2.Clean all the hydraulic parts concerned before mounting the powerunit.
3.Viscosity of the hydraulic oil shoud be 15-68 cst,which shouldalso be clean and free of impurities.N46 hydraulic oil is recommended.
4.Me whakairi poutū tenei wae mana.
5.Check the oil level in the tank after the initial operation of thepower unit.6.Oil changing is required after the initial 100 operation hours,afterwards once every 3000 hours.
Mahinga Whakahuahua
Parameters me te ahua
tauira |
Motini Volt |
Te Hiko Motuka |
Tere ingoa |
displacement |
Te Pehenga Pūnaha |
Raukaha tank |
Solenoid Valve Voit |
YBZ-H2.7D4l310A/AMQlT1 |
380VAC |
3KW |
2850 / 3450RPM |
2.7ml / r |
32MPa |
10L |
24VDC |
YBZ-H2.7D30l310A/AMQlT1 |
200-240VAC / 400-415VAC |
||||||
YBZ-H2.7D4l310A/ACQJT1 |
380VAC |
2850RPM |
24VDC |
||||
YBZ-H3.2D4l310A/ACQJT1 |
3.2ml / r |