+ 86-18761016003

Units Hiko Mo Te Hikinga Matapirua Rua

Kei konei koe: Kāinga >Hua >Nga Uepu Mo Te Korero Hauora >Units Hiko Mo Te Hikinga Matapirua Rua

  • /img/power_unit_for_double_scissors_lift2.jpg

Wae Hiko Mo Nga Kutikuti Rua Hiki2

  • Whakaahuatanga
  • Tawhā me te huru
  • Inquiry

Equipped with the zero leakage double-check solenoid valves,this power unit fulfils the completeseparation of the two independent circuits,which are respectively for the main platform and subordinateplatform of the double scissors lift Four cut-off valves are used for emergency oil return in case of powerfailure.By increasing the number of the solenoid vavles,it is easy to get more independent circuits andto control the corresponding cylinders.

He Pukapuka Motuhake

1.The power unit is of S3 duty,which can only work intermittentlyand repeatedly,ie,1minute on and 9 minutes off.

2.Clean all the hydraulic parts concerned before mounting thepower unit.

3.Viscosity of the hydraulic oil shoud be 15-68 cst,which shouldalso be clean and free of impurities.N46 hydraulic oil isrecommended.ee of impurities,N46 recommended hydraulic oil.

4.This power unit should be mounted verticaly.

5Check the oil level in the tank after the initial operation of thepower unit.6.Oil changing is required after the initial 100 operation hours,aterwards once every 3000 hours.

Mahinga Whakahuahua

Parameters me te ahua

tauira

Motini Volt

Te Hiko Motuka

Tere Whakatika

displacement

Te Pehenga Pūnaha

Raukaha tank

Solenoid Valve Voit

YBZ5-G2.1J3H30E/MCDBN2

220VAC

2.2KW

2800RPM

2.1ml / r

25MPa

25L

24VDC

YBZ5-G2.1J3H30E/MCDBN2

380VAC

2.5ml / r

220VAC

Ikātahi
  

WHAKAARO KI TE MAHI!He tuku imeheni me te waatea kua tohatohahia: