+ 86-18761016003

Paceliet galda barošanas bloku

Tu esi šeit : Sākums >Prece >Hidrauliskās barošanas vienības >Paceliet galda barošanas bloku

  • /img/lift_table_power_unit4.jpg

Pacelšanas galda barošanas bloks

  • apraksts
  • Parametri un raksturs
  • izmeklēšana

This power unit is designed exclusively for the large lift table, Consistingof high pressure gear pump, AC motor, multi-functional manifold, valves,tank,ect. The lowering movement is actived by the solenoid valve and the speed controlled by the adjustable throttle valve. When the lift rises to a high positoin,but the power supply is cut, the lowering movement is controlled by the manual override function.

Īpašas piezīmes

1 .This power unit is of S3 duty cycle,which can only workintermittently and repeatedly, i.e., 1 minute on and 9 minutes off.

2. Pirms strāvas bloka uzstādīšanas notīriet visas attiecīgās hidrauliskās daļas.

3. Viscosity of the oil shoud be 15-68 cst.which should also be clean and free of impurities.N46 hydraulic oil is recommended.

4.Oil changing is required after the initial 100 operation hours,afterwards once every 3000 hours.

5.The power unit should be mounted vertically.

 

Kontūras dimensija

Parametri un raksturs

modelis

Motora spriegums

Motor Power

Nominālais ātrums

pārvietojums

Sistēmas spiediens

Tvertnes ietilpība

Solenoid Vavlve Volt

YBZ5-E8L4J2/TCDBT1

380VAC

4KW

2850RPM

8.08 ml / r

16MPa

50L

24VDC

YBZ5-D8L4J2HCDAT1

10MPa

12VDC

YBZ5-C8L4J2/TCDCT1

6.3MPa

24VAC

Ipieprasījums
  

PARAKSTĪT UN SAGLABĀT!Ekskluzīvi e-pasta piedāvājumi un ierobežota laika atlaides

Pieprasījuma grozs