Maitinimo blokas šiukšliavežio bagažinei
- Parametrai ir pobūdis
- tyrimas
Equipped with two zero leakage double-check solenoid valves, this power unit has two independent circuits for the lifting cylinder and rotating cylinder of tailgate of electrical garbage truck. The lowering speed of the cylinders is regulated by the pressure compensated flow valve in the return line. This power unit can also be used in those applications where two separated hydraulic circuits are needed such as double scissors lift, doublepallet mover etc.
Specialios pastabos
1. Šio maitinimo bloko funkcija yra S3, ty 30 sekundžių įjungta ir 270 sekundžių išjungta.
2. Prieš montuodami maitinimo bloką, išvalykite visas atitinkamas hidraulines dalis.
3. Viscosity of the oil shoud be 15-68 cst, and the oil should be clean and free of impurities, N46 hydraulic oil is recommended .
4. This power unit should be mounted horizontally.
5. Check the oil level in the tank after the initial run of the power unit.
6. Tepalą reikia keisti po pirmųjų 100 darbo valandų, po to kartą per 3000 valandų.
Kontūro matmuo
Pparametrai ir pobūdis
Modelis |
Variklio įtampa |
galios variklis |
Nominalus greitis |
Poslinkis |
Sistemos slėgis |
bako talpa |
YBZ5-D1.6A9A30/WUCTT2 |
48VDC |
2KW |
2500RPM |
1.6ml / r |
12MPa |
3L |