+ 86-18761016003

Dvigubų žirklių pakėlimo maitinimo blokai

Tu esi čia : Pagrindinis >produktas >Hidrauliniai maitinimo blokai >Dvigubų žirklių pakėlimo maitinimo blokai

  • /img/power_unit_for_double_scissors_lift3.jpg

Dvigubų žirklių pakėlimo maitinimo blokas

  • aprašymas
  • Parametrai ir pobūdis
  • tyrimas

This power unit offers a higher safety level withtwo groups of check valves and solenoid release valves.Two different lowering speeds are achieved by energiz-ing/de-energizing the third solenoid valve during the low-ering process.

Specialios pastabos

1.The power unit is of S3 duty,which can only work intermittentlyand repeatedly,ie,1minute on and 9 minutes off.

2.Clean all the hydraulic parts concerned before mounting the powerunit.

3.Viscosity of the hydraulic oil shoud be 15-68 cst,which shouldalso be clean and free of impurities.N46 hydraulic oil is recommended.

4.This power unit should be mounted vertically.

5.Check the oil level in the tank after the initial operation of thepower unit.6.Oil changing is required after the initial 100 operation hours,afterwards once every 3000 hours.

Kontūro matmuo


Pparametrai ir pobūdis

Modelis

Motor Volt

Motor Power

Nominal Speed

Poslinkis

Sistemos slėgis

bako talpa

Solenoid Valve Voit

YBZ-H2.7D4l310A/AMQlT1

380VAC

3KW

2850 / 3450RPM

2.7ml / r

32MPa

10L

24VDC

YBZ-H2.7D30l310A/AMQlT1

200-240VAC/400-415VAC

YBZ-H2.7D4l310A/ACQJT1

380VAC

2850RPM

24VDC

YBZ-H3.2D4l310A/ACQJT1

3.2ml / r

Ipaklausimas
  

PRISIJUNKITE IR IŠSAUGOKITE!Išskirtiniai el. Pašto pasiūlymai ir riboto laiko nuolaidų pasiūlymai

Užklausos krepšelis
tuščiastyrimas