+86-18761016003

Lift Table Power Unit

You are here : Home >Product >Hydraulic Power Units >Lift Table Power Unit

  • /img/lift_table_power_unit5.jpg

Lift Table Power Unit5

  • Description
  • Parameters and character
  • Inquiry

This power unit is designed exclusively for the large-lift table. Consisting of high pressure gear pump, AC motor, multi-functional manifold, valves.tank, ect.The lowing movement is activated by the solenoid valve and the speed controlled by the adjustable throttle valve.

Special Notes

1. The power unit is of S3 duty, which can only work intermit-tently and repeatedly,ie., 1 minute on and 9 minutes off.

2. Clean all the hydraulic parts concerned before mounting the power unit.

3. The viscosity of the oil shoud be 15-68 cst.and the oil should be clean and free of impurities,N46 recommended hydraulic oil.

4. Change the oil after the first 100 hours of using the power unit, then change the oil every 3000 hours.

5. The power unit should be mounted vertically.

Outline Dimension

Parameters and character

Model

Motor Volt

Motor Power

Rated Speed

Displacement

System Pressure

Tank Capacity

Solenoid Valve Volt

LPU-E15P4J2ZTKDAZ1

380VAC

4KW

1450 RPM

15ml/r

16MPa

80L

12VDC

LPU-E15P4K2/TKDBZ1

5.5KW

15ml/r

16MPa

24VDC

LPU-E23P4K2/TKDDZ1

23mll/r

14MPa

110VAC

LPU-D28P4K2/TKDEZ1

28ml/r

12MPa

220VAC

Inquiry
  

SIGN UP AND SAVE !Exclusive email offers & Limited time discount specials

Inquiry basket
emptyinquiry