+86-18761016003

Lift Table Power Unit

You are here : Home >Product >Hydraulic Power Units >Lift Table Power Unit

  • /img/lift_table_power_unit4.jpg

Lift Table Power Unit4

  • Description
  • Parameters and character
  • Inquiry

This power unit is designed exclusively for the large lift table, Consistingof high pressure gear pump, AC motor, multi-functional manifold, valves,tank,ect. The lowering movement is actived by the solenoid valve and the speed controlled by the adjustable throttle valve. When the lift rises to a high positoin,but the power supply is cut, the lowering movement is controlled by the manual override function.

Special Notes

1 .This power unit is of S3 duty cycle,which can only workintermittently and repeatedly, i.e., 1 minute on and 9 minutes off.

2. Clean all the hydraulic parts concerned before mounting the power unit.

3. Viscosity of the oil shoud be 15-68 cst.which should also be clean and free of impurities.N46 hydraulic oil is recommended.

4.Oil changing is required after the initial 100 operation hours,afterwards once every 3000 hours.

5.The power unit should be mounted vertically.

 

Outline Dimension

Parameters and character

Model

Motor Volt

Motor Power

Rated Speed

Displacement

System Pressure

Tank Capacity

Solenoid Vavlve Volt

YBZ5-E8L4J2/TCDBT1

380VAC

4KW

2850RPM

8.08ml/r

16MPa

50L

24VDC

YBZ5-D8L4J2HCDAT1

10MPa

12VDC

YBZ5-C8L4J2/TCDCT1

6.3MPa

24VAC

Inquiry
  

SIGN UP AND SAVE !Exclusive email offers & Limited time discount specials

Inquiry basket
emptyinquiry