+86-18761016003

Lift Table Power Unit

You are here : Home >Product >Hydraulic Power Units >Lift Table Power Unit

  • /img/lift_table_power_unit3.jpg

Lift Table Power Unit3

  • Description
  • Parameters and character
  • Inquiry

Designed exclusively for lift tables, this power unit consists of high pressure gear pump, AC motor, multi-functional manifold, valves, tank, etc. Start the motor to fulfill the lifting function while the lowing movement is activated by the solenoid valve with the lowering speed controlled by the pressure compensated flow control valve.

Special Notes

1. The power unit is of S3 duty, which can only be worked intermittently, ie., 1 minute on and 9 minutes off.

2. Clean all the hydraulic parts concerned before mounting the power unit.

3. Viscosity of the hydraulic oil shoud be 15-68 cst,which should also be clean and free of impurities.N46 hydraulic oil is recommended.

4. Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.

5. The power unit should be mounted horizontally.

Outline Dimension

Parameters and character

Model

Motor Volt

Motor Power

Rated Speed

Displacement

System Pressure

Tank Capacity

Solenoid Valve Volt

L(mm)

YBZ5-F2.1B3G2/LBUAN1

220VAC

1.5KW

1450 RPM

2.1ml/r

20MPa

5L

12VDC

627

YBZ5-F2.7B3G2/LBUBN1

2.7ml/r

20MPa

6L

24VDC

672

VBZ5-E3.2C3G2/LBUCN1

3.2ml/r

16MPa

8L

24VAC

777

YBZ5-F2.1C4H2/LCUDN1

380VAC

2.2KW

2850 RPM

2.1ml/r

20MPa

8L

110VAC

YBZ5-F2.7D4H2/LCUEN1

2.7ml/r

20MPa

10L

220VAC

867

YBZ5-E3.2E4H2 儿 CUEN1

3.2ml/r

16MPa

12L

220VAC

887

Inquiry
  

SIGN UP AND SAVE !Exclusive email offers & Limited time discount specials