ឯកតាថាមពលចូលចត ៥
- ប៉ារ៉ាម៉ែត្រនិងតួអក្សរ
- ស៊ើបអង្កេត
This dock leveler power unit simply raised the ramp when the motor is activated and the 3-way,position solenoid valve has got power. When the ramp has reached full extension,the 3-way,2-position solenoid valve is power-lossing.the lip can come out and come back by the 4-way,2-position solenoid valve. The ramp lowered by the motor power-lossing and all of 2 solenoid valves has got power. The low・ered speed control by flow control/check valve.
កំណត់ចំណាំពិសេស
1 .The Ac motor is of S3 duty cycle.which can only work inter-mittently and repeatedlyj.e.,1 minute on and 9 minutes off.
2. Clean all the hydraulic comp on ents concer ned before installa-tion of the power unit.
3. Viscosity of the oil should be 15-68 cst, and the oil should beclean and free of impurities,N46 hydraulic oil is recommended .
4. Check the oil level in the tank after the initial running of the power unit.
5.Oil changing is required after the initial 100 operation hours, afterwards once ©very 3000 hours.
គ្រោងវិមាត្រ
Parameters និងតួអក្សរ
សារីុ |
ម៉ូទ័រវ៉ុល |
សន្ទះសូលេស្តេរ៉ូអ៊ីតវ៉ុល |
ថាមពលម៉ូតូ |
ល្បឿនបន្ទាប់បន្សំ |
ការផ្លាស់ទីលំនៅ |
Relief Pressure |
ការកសាងសមត្ថភាពធុង |
L{mm) |
YBZ5-E2.1B4E180/MBUCT1 |
220 / 380VAC |
24VAC |
0.75KW |
1450RPM |
៦,៨ មីលីក្រាម / ម |
15MPa |
5L |
494 |
YBZ5-E2.7B4E180/MBUCT1 |
៦,៨ មីលីក្រាម / ម |
15MPa |