+ 86-18761016003

Angkat Unit Tenaga Meja

Sampeyan kene: Home >Product >Unit Tenaga Hidrolik >Angkat Unit Tenaga Meja

  • /img/lift_table_power_unit4.jpg

Angkat Tenaga Meja4

  • Description
  • Parameter lan karakter
  • Inquiry

This power unit is designed exclusively for the large lift table, Consistingof high pressure gear pump, AC motor, multi-functional manifold, valves,tank,ect. The lowering movement is actived by the solenoid valve and the speed controlled by the adjustable throttle valve. When the lift rises to a high positoin,but the power supply is cut, the lowering movement is controlled by the manual override function.

Cathetan Khusus

1 .This power unit is of S3 duty cycle,which can only workintermittently and repeatedly, i.e., 1 minute on and 9 minutes off.

2. Resiki kabeh bagean hidrolik sing gegandhengan sadurunge dipasang ing unit daya.

3. Viscosity of the oil shoud be 15-68 cst.which should also be clean and free of impurities.N46 hydraulic oil is recommended.

4.Oil changing is required after the initial 100 operation hours,afterwards once every 3000 hours.

5.The power unit should be mounted vertically.

 

Ukuran Garis Besar

Parameter lan karakter

model

Motor Volt Kab

Motor Power

Kacepetan Rated

pamindahan

Sistem Presensi

tank Kapasitas

Solenoid Vavlve Volt

YBZ5-E8L4J2/TCDBT1

380VAC

4KW

2850RPM

8.08ml / r

16MPa

50L

24VDC

YBZ5-D8L4J2HCDAT1

10MPa

12VDC

YBZ5-C8L4J2/TCDCT1

6.3MPa

24VAC

Iniku
  

SIGN UP lan NGirit!Penawaran email eksklusif & spesial diskon winates