Unità di alimentazione del tavolo elevatore 4
- Parametri e carattere
- Inchiesta
This power unit is designed exclusively for the large lift table, Consistingof high pressure gear pump, AC motor, multi-functional manifold, valves,tank,ect. The lowering movement is actived by the solenoid valve and the speed controlled by the adjustable throttle valve. When the lift rises to a high positoin,but the power supply is cut, the lowering movement is controlled by the manual override function.
Note speciali
1 .This power unit is of S3 duty cycle,which can only workintermittently and repeatedly, i.e., 1 minute on and 9 minutes off.
2. Pulire tutte le parti idrauliche interessate prima di montare la centralina.
3. Viscosity of the oil shoud be 15-68 cst.which should also be clean and free of impurities.N46 hydraulic oil is recommended.
4.Oil changing is required after the initial 100 operation hours,afterwards once every 3000 hours.
5.The power unit should be mounted vertically.
DIMENSIONE DEL PROFILO
Pparametri e carattere
Modello |
Volt motore |
Potenza motore |
Velocità nominale |
Cilindrata |
Pressione del sistema |
Capacità serbatoio |
Solenoid Vavlve Volt |
YBZ5-E8L4J2/TCDBT1 |
380VAC |
4KW |
2850 RPM |
8.08ml / r |
16MPa |
50L |
24VDC |
YBZ5-D8L4J2HCDAT1 |
10MPa |
12VDC |
|||||
YBZ5-C8L4J2/TCDCT1 |
6.3MPa |
24VAC |