+ 86-18761016003

Rukunin Wutar Motar Pallet

Kuna nan: Gida >Samfur >Na'urar Hydraulic >Rukunin Wutar Motar Pallet

  • /img/pallet_truck_power_unit2.jpg

Unit ɗin Wutar Motar Pallet2

  • description
  • Siga da hali
  • Sunan

Consisting of high pressure gear pump,Low noise DC motor,multi-functional manifold,valves,tank,ect. This power unit can be widely used in the industry of logistic devices such as minifork lift ect.The lowering movement is controlled by the solenoid valve with the speed controlled by the balance valve.

Bayanan Musamman

1 .This power unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.

2. Clean all the hydraulic parts concerned before mounting the power unit

3. Viscosity of the hydrciulic oil shoud he 15-68 cst,which should also be clean and free of impurities.N46 hydraulic oil is recommended.

4. Ya kamata a dora wannan rukunin wuta a tsaye.

5. Check the oil level in the tank after the first star of the power unit.

6.Oil changing is required after the initial 100 operation hours,after-wards once every 3000 hours.

Tsarin Gwaji

Parameters da hali

model

Motar Volt

Motor Power

Gudun Suna

Hijira

Matsin tsarin

tank Capacity

Solenoid Valve Volt

L (mm)

YBZ5-E0.5W1T2/UVTAP2

12VDC

0.8KW

3500RPM

0.5ml/r

16MPa

1L

12VDC

308

YBZ5-E0.63W1T2/UVTAP2

0.63ml/r

YBZ5-E0.5Y2T2/UVTBP2

24VDC

0.5ml/r

24VDC

YBZ5-E0.75Y2T2/UVTBP2

0.75ml/r

YBZ5-E1.0W2T2/UVTBP2

1.0ml/r

Iƙwayar cuta
  

SAUKI DA SAURARA!Iyakar imel ɗin da aka keɓance & Kwastomomi na ƙarancin lokacin ragi