+ 86-18761016003

Farashin GPM1

Kuna nan: Gida >Samfur >Gilashin Gilashin Ruwa >Farashin GPM1

  • /img/gpm1-hydraulic-gear-pumps-.jpg
  • /upfile/2020/05/26/20200526123358_531.jpg
  • /upfile/2020/05/26/20200526123432_749.jpg
  • /upfile/2020/05/26/20200526123443_296.jpg
  • /upfile/2020/05/26/20200526123453_261.jpg

GPM1 Ruwan Ruwan Ruwa

  • description
  • Siga da hali
  • Our sabis
  • Sunan

 

GASKIYAR TSARO

Famfu na kayan aiki na waje sune mafi shaharar fanfuna da ake amfani da su a cikin tsarin hydraulic na zamani.

Siffofin su ne versatility, ƙarfi da kuma dogon amfani rayuwa.

Ginin mai sauƙi yana tabbatar da iyakacin farashin siye da sabis. Godiya ga akwai mahimman ra'ayoyi, tare da haɓaka ƙirar samfuri da fasalulluka, bincike-bincike bisa shekaru da yawa na gwaninta, daidaito a cikin zaɓin kayan, samar da tsari da aka bi dalla-dalla da gwaje-gwaje akan sassan da aka samar da yawa, famfunan kayan aikinmu sun kai saman. ingancin matsayin.

Saboda wannan dalili, samfuranmu na iya yin aiki a ƙarƙashin yanayin aiki masu nauyi kuma suna watsa babban ƙarfin lantarki. Bugu da ƙari, SJ-TECHNOLOGY gear famfo yana da kyaun na'ura mai aiki da karfin ruwa, injina da ingancin juzu'i, ƙaramin amo kuma, ƙarshe amma ba kalla ba, ƙaramin girma.

SJ Technology gear pumps ya kara haɓaka nau'ikan samfuransa tare da sabon jerin famfo mai suna GPM inda ƙungiyoyin 1P, 1A, GPM0.0, GPM1.0, GPM2.0, GPM2.6, GPM3.0 suka dace da mafi daban-daban aikace-aikace a duka masana'antu, mobile, teku da kuma Aerospace masana'antu.

Gabaɗaya waɗannan famfo na gear, yawanci sun ƙunshi nau'ikan gear guda biyu masu goyan bayan bushes na aluminium, jiki, flange mai tsaro da murfin. Shaft na kayan tuƙi da ke haye sama da flange yana hawa zoben hatimin tagwayen leɓe (leɓen ciki shine hatimi kuma na waje shine hatimin ƙura). Zobe na roba yana tabbatar da zoben a wurin. Jikin famfo da aka yi da musamman hi-resistant aluminum gami samu ta hanyar extrusion tsari, yayin da flange da murfin da aka yi daga spheroidal simintin ƙarfe baƙin ƙarfe, wannan domin tabbatar da rage girman nakasawa ko da a lokacin da babban matsa lamba, zama ci gaba ko intermittent. ko matsa lamba.

Gears an yi su ne da ƙarfe na musamman. Su masana'antu tsari ƙasa da lafiya gama haka don samun wani babban mataki na surface tabbatar da low pulsation levers da ƙananan amo levers a lokacin famfo aiki.

Bushings an yi su ne da ƙarancin juzu'i na musamman da gariyar aluminum mai juriya kuma an ƙera ta daga simintin mutuwa. Bayan haka suna sanye take da DU bearings antifriction.

Yankunan ramuwa na musamman akan bushings, wanda aka keɓance ta hanyar hatimi na musamman tare da zoben anti-extrusion, suna ba da damar cikakken motsi na axial da radial zuwa bushes, wanda yayi daidai da famfo matsa lamba. Ta wannan hanyar, drip na ciki yana raguwa sosai, don haka tabbatar da kyakkyawan aikin famfo (duka cikin sharuddan girma da gabaɗaya) da ingantaccen lubrication na sassan motsi na famfo.

Parameters da hali

 

 

M6 thread depth 13mm.

To mount the pump, n.4 M8 screws,

With a torque wrench setting fixed at 27±3Nm.

Shaft M10 nuts, with a torque wrench setting fixed at 40Nm

model

型号

Hijira

Flow at 1500

rpm

matsa lamba

压力 (bar)

Speed

转速 (r/min)

DIMENSIONS 尺寸 (mm)

Hijira

(cm³ / rev)

rated

额定

ganiya

Mafi girma

rated

额定

Max

Mafi girma

min

最低

L1

L

GPM1FC1.4FTX

1.4

2.0

230

310

3000

1000

6000

40

82

GPM1FC2.1FTX

2.1

3.0

230

310

3000

1000

6000

41

84

GPM1FC2.8FTX

2.8

3.9

230

310

3000

800

5000

42

86

GPM1FC3.5FTX

3.5

4.6

230

310

3000

800

5000

43

88

GPM1FC4.1FTX

4.1

5.3

230

310

3000

800

4000

44

90

GPM1FC5.2FTX

5.2

6.0

230

310

3000

800

4000

45.5

93

GPM1FC6.2FTX

6.2

7.1

210

290

2500

600

3800

47

96

GPM1FC7.6FTX

7.6

8.6

210

290

2500

600

3200

49

100

GMP1FC9.3FTX

9.3

10.0

210

260

2500

600

2600

51.5

105

GMP1FC11.0FTX

11

11.4

190

260

2500

600

2600

54

110

GMP1FC13.8FTX

13.8

14.0

190

240

2000

600

2200

58

118

 

 

 

 

 

 

 

 

 

 

 

 


 

“D” and “d” ports are machined in compliance with thread port with O-ring seal in truncated housing SAE J1926/1 (ISO J1926-1).

To mount the pump, n4 M8 screws, with a torque wrench setting fixed at 27±3Nm.

model

型号

Hijira

Flow at 1500

rpm

matsa lamba

压力 (bar)

Speed

转速 (r/min)

DIMENSIONS 尺寸 (mm)

Hijira

(cm³ / rev)

rated

额定

ganiya

Mafi girma

rated

额定

Max

Mafi girma

min

最低

D

d

GPM1FC1.4SKS

1.4

2.0

230

310

3000

1000

6000

3/4-16UNF

9/16-18UNF

GPM1FC2.1SKS

2.1

3.0

230

310

3000

1000

6000

3/4-16UNF

9/16-18UNF

GPM1FC2.8SKS

2.8

3.9

230

310

3000

800

5000

3/4-16UNF

9/16-18UNF

GPM1FC3.5SKS

3.5

4.6

230

310

3000

800

5000

3/4-16UNF

9/16-18UNF

GPM1FC4.1SKS

4.1

5.3

230

310

3000

800

4000

3/4-16UNF

9/16-18UNF

GPM1FC5.2SKS

5.2

6.0

230

310

3000

800

4000

3/4-16UNF

9/16-18UNF

GPM1FC6.2SKS

6.2

7.1

210

290

2500

600

3800

3/4-16UNF

9/16-18UNF

GPM1FC7.6SKS

7.6

8.6

210

290

2500

600

3200

7/8-14UNF

3/4-16UNF

GMP1FC9.3SKS

9.3

10.0

210

260

2500

600

2600

7/8-14UNF

3/4-16UNF

GMP1FC11.0SKS

11

11.4

190

260

2500

600

2600

7/8-14UNF

3/4-16UNF

GMP1FC13.8SKS

13.8

14.0

190

240

2000

600

2200

7/8-14UNF

3/4-16UNF

 

 

 

 

 

 

 

 

 

 

 

 


 

“D” and “d” ports are machined in compliance with thread port with O-ring seal in truncated housing SAE J1926/1 (ISO J1926-1).

To mount the pump, n4 M8 screws, with a torque wrench setting fixed at 27±3Nm.

 

 

model

型号

Hijira

Flow at 1500

rpm

matsa lamba

压力 (bar)

Speed

转速 (r/min)

DIMENSIONS 尺寸 (mm)

Hijira

(cm³ / rev)

rated

额定

ganiya

Mafi girma

rated

额定

Max

Mafi girma

min

最低

D

d

GPM1FC1.4RK1S

1.4

2.0

230

310

3000

1000

6000

3/4-16UNF

9/16-18UNF

GPM1FC2.1RK1S

2.1

3.0

230

310

3000

1000

6000

3/4-16UNF

9/16-18UNF

GPM1FC2.8RK1S

2.8

3.9

230

310

3000

800

5000

3/4-16UNF

9/16-18UNF

GPM1FC3.5RK1S

3.5

4.6

230

310

3000

800

5000

3/4-16UNF

9/16-18UNF

GPM1FC4.1RK1S

4.1

5.3

230

310

3000

800

4000

3/4-16UNF

9/16-18UNF

GPM1FC5.2RK1S

5.2

6.0

230

310

3000

800

4000

3/4-16UNF

9/16-18UNF

GPM1FC6.2RK1S

6.2

7.1

210

290

2500

600

3800

3/4-16UNF

9/16-18UNF

GPM1FC7.6RK1S

7.6

8.6

210

290

2500

600

3200

7/8-14UNF

3/4-16UNF

GMP1FC9.3RK1S

9.3

10.0

210

260

2500

600

2600

7/8-14UNF

3/4-16UNF

GMP1FC11.0RK1S

11

11.4

190

260

2500

600

2600

7/8-14UNF

3/4-16UNF

GMP1FC13.8RK1S

13.8

14.0

190

240

2000

600

2200

7/8-14UNF

3/4-16UNF

 

 

 

 

 

 

 

 

 

 

 

 


 

“D” and “d” ports are machined in compliance with thread port with O-ring seal in truncated housing SAE J1926/1 (ISO J1926-1).

To mount the pump, n4 M8 screws, with a torque wrench setting fixed at 30±3Nm.

model

型号

Hijira

Flow at 1500

rpm

matsa lamba

压力 (bar)

Speed

转速 (r/min)

DIMENSIONS 尺寸 (mm)

Hijira

(cm³ / rev)

rated

额定

ganiya

Mafi girma

rated

额定

Max

Mafi girma

min

最低

D

d

GPM1FC1.4S1K2S

1.4

2.0

230

310

3000

1000

6000

3/4-16UNF

9/16-18UNF

GPM1FC2.1S1K2S

2.1

3.0

230

310

3000

1000

6000

3/4-16UNF

9/16-18UNF

GPM1FC2.8S1K2S

2.8

3.9

230

310

3000

800

5000

3/4-16UNF

9/16-18UNF

GPM1FC3.5S1K2S

3.5

4.6

230

310

3000

800

5000

3/4-16UNF

9/16-18UNF

GPM1FC4.1S1K2S

4.1

5.3

230

310

3000

800

4000

3/4-16UNF

9/16-18UNF

GPM1FC5.2S1K2S

5.2

6.0

230

310

3000

800

4000

3/4-16UNF

9/16-18UNF

GPM1FC6.2S1K2S

6.2

7.1

210

290

2500

600

3800

3/4-16UNF

9/16-18UNF

GPM1FC7.6S1K2S

7.6

8.6

210

290

2500

600

3200

7/8-14UNF

3/4-16UNF

GMP1FC9.3S1K2S

9.3

10.0

210

260

2500

600

2600

7/8-14UNF

3/4-16UNF

GMP1FC11.0S1K2S

11

11.4

190

260

2500

600

2600

7/8-14UNF

3/4-16UNF

GMP1FC13.8S1K2S

13.8

14.0

190

240

2000

600

2200

7/8-14UNF

3/4-16UNF

 

Oayyukan ku

IBayanan NSTALLATION  

Kafin fara tsarin akai-akai, muna ba da shawarar ɗaukar wasu matakai masu sauƙi:

Bincika alkiblar jujjuyawar famfo don dacewa da mashin tuƙi ɗaya.

Bincika daidaitattun daidaituwa na famfo famfo da motar motsa jiki: wajibi ne cewa haɗin ba ya haɗa da nauyin axial ko radial.

Kare hatimin hatimin tuƙi yayin zanen famfo. Bincika idan wurin tuntuɓar da ke tsakanin zoben hatimi da sandal ɗin yana da tsabta: ƙura na iya haifar da lalacewa da sauri.

Cire duk datti, kwakwalwan kwamfuta da duk jikin waje daga flanges masu haɗa mashigai da tashar jiragen ruwa na bayarwa.

Tabbatar cewa ƙarshen bututun ci da dawowa koyaushe suna ƙasa da ledar ruwa kuma gwargwadon yadda zai yiwu.

Shigar da famfo a ƙasa kai, idan zai yiwu.

Cika famfo da ruwa, kuma juya shi da hannu.

Cire haɗin magudanar famfo yayin farawa don zubar da iska daga kewaye.

A farkon farawa, saita bawuloli masu iyakance matsi a min. darajar mai yiwuwa.

Guji ƙananan saurin jujjuyawa fiye da min. an yarda da matsa lamba sama da ci gaba da max. matsa lamba.

Kada a fara tsarin a ƙananan yanayin zafi a ƙarƙashin yanayin kaya ko bayan dogon tasha (koyaushe guje wa ko iyakance kayan farawa don yin famfo tsawon rai).

Fara tsarin na 'yan mintoci kaɗan kuma kunna duk abubuwan da aka gyara; zubar da iska daga da'ira don duba yadda ya cika.

Duba lever ruwa a cikin tanki bayan loda duk abubuwan da aka gyara.

A ƙarshe, sannu a hankali ƙara matsa lamba, ci gaba da bincika yanayin ruwa da motsin sassa, duba saurin juyawa har sai kun isa saita ƙimar aiki waɗanda zasu kasance cikin iyakokin da aka nuna a cikin wannan kasida.

 

 

Ruwan Hydraulic  

Yi amfani da ƙayyadaddun ruwan ma'adinai na tushen ma'adinan ruwa masu kyau na rigakafin sawa, rigakafin kumfa, antioxidant, anti-lalata da kaddarorin mai. Ruwa ya kamata kuma ya bi ka'idodin DIN51525 da VDMA 24317 kuma su sami ta hanyar 11.th Farashin FZG.

Ga daidaitattun samfuran, zafin jiki na ruwa kada ya kasance tsakanin -10 ℃ da + 80 ℃.

 

Matsakaicin dankowar ruwa na kinematic sune kamar haka:

Ƙimar da aka yarda

6÷500 cSt

Ƙimar da aka ba da shawarar

10÷100 cSt

An yarda da ƙimar a farawa

<2000 cSt

Iƙwayar cuta
  

SAUKI DA SAURARA!Iyakar imel ɗin da aka keɓance & Kwastomomi na ƙarancin lokacin ragi