+ 86-18761016003

Unidade de potencia para cubrir camións volquetes

Estás aquí : casa >Produto >Unidades de potencia hidráulica >Unidade de potencia para cubrir camións volquetes

  • /img/power_unit_for_dumping_truck_covering.jpg

Unidade de potencia para cubrir camións volquetes

  • descrición
  • Parámetros e carácter
  • enquisa

Used to operate a double action cylinder of the dumping truckcovering mechanery,this power unit consists of high pressure gearpump,DC motor,multi-functional manifod,valves and oil tank,ect.The opening and closing actions of the covers are controlled by asolenoid directional valve,while the speed is adjusted by the throttles.

Notas especiais

1.The duty of this power unit is S3,i.e.,30 seconds on and 270seconds off.

2. Limpe todas as pezas hidráulicas antes de montar a unidade de potencia.

3.Viscosity of the hydraulic olil shoud be 15-68 cst,which shouldalso be clean and free of impurities.N46 hydraulic oil isrecommended.

4.The power unit should be mounted horizontally.5.Check the oil level in the tank after the initial running of thepower unit.

6.Change the oil after the first 100 hours of running the powerunit,then change the oil every 3000 hours.

Dimensión do esquema

Parameters e carácter

modelo

Motor Volt

Potencia do motor

Velocidade nominal

Desprazamento

Presión do sistema

Capacidade do vaso

L (mm)

YBZ-F1.6A1W8/1

12VAC

1.5KW

2500RPM

1.6 ml / r

18MPa

3.5L

448

YBZ-F2.5B2A8/1

25VAC

2KW

2.5 ml / r

5L

463

Iconsulta
  

INSCRIBE E AFORRE!Ofertas de correo electrónico exclusivas e ofertas especiais con desconto de tempo limitado

Cesta de consulta
baleiroenquisa