+ 86 18761016003-

Aonad Cumhachta Do Chumhdach Truck Dumpála

Tá tú anseo : Baile >táirge >Aonaid Cumhachta Hiodrálacha >Aonad Cumhachta Do Chumhdach Truck Dumpála

  • /img/power_unit_for_dumping_truck_covering.jpg

Aonad Cumhachta Chun Clúdach Trucail a Dhumpáil

  • Tuairisc
  • Paraiméadair agus carachtar
  • Fiosrúcháin

Used to operate a double action cylinder of the dumping truckcovering mechanery,this power unit consists of high pressure gearpump,DC motor,multi-functional manifod,valves and oil tank,ect.The opening and closing actions of the covers are controlled by asolenoid directional valve,while the speed is adjusted by the throttles.

Nótaí Speisialta

1.The duty of this power unit is S3,i.e.,30 seconds on and 270seconds off.

2.Clean na codanna hiodrálacha go léir lena mbaineann sula gcuirtear an t-aonad cumhachta suas.

3.Viscosity of the hydraulic olil shoud be 15-68 cst,which shouldalso be clean and free of impurities.N46 hydraulic oil isrecommended.

4.The power unit should be mounted horizontally.5.Check the oil level in the tank after the initial running of thepower unit.

6.Change the oil after the first 100 hours of running the powerunit,then change the oil every 3000 hours.

Toise Imlíne

Parameters agus carachtar

Múnla

Volt Mótair

Cumhacht Mótair

Luas Ainmniúil

Díláithriú

Brú Córais

Toilleadh umar

L (mm)

YBZ-F1.6A1W8/1

12VAC

1.5KW

2500RPM

1.6ml / r

18MPa

3.5L

448

YBZ-F2.5B2A8/1

25VAC

2KW

2.5ml / r

5L

463

Ifiosrúchán
  

SÍNIÚ AGUS SÁBHÁIL!Tairiscintí ríomhphoist eisiacha & sain-lascainí lascaine ama