+ 86 18761016003-

Aonad Cumhachta Tábla Ardaitheora

Tá tú anseo : Baile >táirge >Aonaid Cumhachta Hiodrálacha >Aonad Cumhachta Tábla Ardaitheora

  • /img/lift_table_power_unit4.jpg

Aonad Cumhachta Tábla Ardaitheora4

  • Tuairisc
  • Paraiméadair agus carachtar
  • Fiosrúcháin

This power unit is designed exclusively for the large lift table, Consistingof high pressure gear pump, AC motor, multi-functional manifold, valves,tank,ect. The lowering movement is actived by the solenoid valve and the speed controlled by the adjustable throttle valve. When the lift rises to a high positoin,but the power supply is cut, the lowering movement is controlled by the manual override function.

Nótaí Speisialta

1 .This power unit is of S3 duty cycle,which can only workintermittently and repeatedly, i.e., 1 minute on and 9 minutes off.

2. Glan na páirteanna hiodrálacha go léir lena mbaineann sula gcuirfidh tú an t-aonad cumhachta suas.

3. Viscosity of the oil shoud be 15-68 cst.which should also be clean and free of impurities.N46 hydraulic oil is recommended.

4.Oil changing is required after the initial 100 operation hours,afterwards once every 3000 hours.

5.The power unit should be mounted vertically.

 

Toise Imlíne

Parameters agus carachtar

Múnla

Volt Mótair

Cumhacht Mótair

Luas Rátáilte

Díláithriú

Brú Córais

Toilleadh umar

Solenoid Vavlve Volt

YBZ5-E8L4J2/TCDBT1

380VAC

4KW

2850RPM

8.08ml / r

16MPa

50L

24VDC

YBZ5-D8L4J2HCDAT1

10MPa

12VDC

YBZ5-C8L4J2/TCDCT1

6.3MPa

24VAC

Inquiry
  

SÍNIÚ AGUS SÁBHÁIL!Tairiscintí ríomhphoist eisiacha & sain-lascainí lascaine ama

Ciseán fiosrúcháin