Unité d'alimentation pour hayon de camion à ordures
- Paramètres et caractère
- Questions
Equipped with two zero leakage double-check solenoid valves, this power unit has two independent circuits for the lifting cylinder and rotating cylinder of tailgate of electrical garbage truck. The lowering speed of the cylinders is regulated by the pressure compensated flow valve in the return line. This power unit can also be used in those applications where two separated hydraulic circuits are needed such as double scissors lift, doublepallet mover etc.
Notes spéciales
1. La fonction de ce bloc d'alimentation est S3, c'est-à-dire 30 secondes allumée et 270 secondes éteinte.
2. Nettoyez toutes les pièces hydrauliques concernées avant de monter l'unité motrice.
3. Viscosity of the oil shoud be 15-68 cst, and the oil should be clean and free of impurities, N46 hydraulic oil is recommended .
4. This power unit should be mounted horizontally.
5. Check the oil level in the tank after the initial run of the power unit.
6. La vidange d'huile est nécessaire après les 100 premières heures de fonctionnement, puis une fois toutes les 3000 heures.
Dimension Outline
Paramètres et caractère
Modèle |
Volt moteur |
Puissance du moteur |
Vitesse nominale |
Déplacement |
Pression du système |
Capacité du réservoir |
YBZ5-D1.6A9A30/WUCTT2 |
48VDC |
2KW |
2500RPM |
1.6ml / r |
12MPa |
3L |