Unité d'alimentation pour élévateur à double ciseaux1
- Paramètres et caractère
- Questions
Equipped with the zero leakage double-check solenoid valves, this power unit fulfils the complete separation of the two independent circuits, which are respectively for the main platform and subordinate platform of the double scissors lift Two cut-off valves are used for lowering the maching manually in case of power failure. By increasing the number of the solenoid vavles, it is easy to get more independent circuits, which are used to control the corresponding cylinders.
Notes spéciales
1.The power unit is of S3 duty,which can only work intermittentlyand repeatedly,ie.,1minute on and 9 minutes off.
2.Clean allthe hydraulic parts concemed before mounting the powerunit.
3.Viscosity of the oil shoud be 15-68 cst,and the oil should be cleanand free of impurities,N46 hydraulic oil is recommended.
4. Cette unité d'alimentation doit être montée verticalement.
5.Check the oil level in the tank after the initial run of the power unit.
6. Un changement d'huile est nécessaire après les 100 premières heures de fonctionnement, puis une fois toutes les 3000 heures.
Dimension Outline
Paramètres et caractère
Modèle |
Volt moteur |
Puissance du moteur |
Vitesse nominale |
Déplacement |
Pression du système |
Capacité du réservoir |
Voit d'électrovanne |
YBZ5-F2.7C3G30/LBAAN1 |
220VAC |
1.5KW |
1450RPM |
2.7ml / r |
22MPa |
8L |
440 |
YBZ5-F3.2E3G30/LBCAN1 |
3.2ml / r |
20MPa |
12L |
300 |
|||
YBZ5-F2.5F3H30/BCCBN1 |
2.2KW |
2850ROM |
2.5ml / r |
18MPa |
14L |
370 |
|
YBZ5-F3.2G3H30/LCCBN1 |
3.2ml / r |
15MPa |
16L |
440 |
|||
YBZ5-D4.2G3H30/LCCDN1 |
4.2ml / r |
10MPa |
540 |
||||
YBZ5-F2.7H4I30/BCCDN1 |
380VAC |
3KW |
2.7ml / r |
20MPa |
20L |
440 |
|
YBZ5-F3.2I4I30/LCCEN1 |
3.2ml / r |
18MPa |
22L |
370 |
|||
YBZ5-E3.7J4I30/LCCEN1 |
3.7ml / r |
16MPa |
25L |
440 |