+ 86 18761016003-

Transpaletentzako potentzia-unitatea

Hemen zaude : Hasiera >Produktuen >Potentzia Hidraulikoko Unitateak >Transpaletentzako potentzia-unitatea

  • /img/pallet_truck_power_unit2.jpg

Transpaletaren potentzia-unitatea 2

  • Deskribapena
  • Parametroak eta izaera
  • Kontsulta

Consisting of high pressure gear pump,Low noise DC motor,multi-functional manifold,valves,tank,ect. This power unit can be widely used in the industry of logistic devices such as minifork lift ect.The lowering movement is controlled by the solenoid valve with the speed controlled by the balance valve.

Ohar Bereziak

1 .This power unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.

2. Clean all the hydraulic parts concerned before mounting the power unit

3. Viscosity of the hydrciulic oil shoud he 15-68 cst,which should also be clean and free of impurities.N46 hydraulic oil is recommended.

4. Potentzia-unitate hau bertikalki muntatu behar da.

5. Check the oil level in the tank after the first star of the power unit.

6.Oil changing is required after the initial 100 operation hours,after-wards once every 3000 hours.

Eskemaren dimentsioa

Parametroak eta izaera

Model

Motor Volt

Motor Power

Abiadura Nominala

Desplazamendua

Sistemaren presioa

Tank aforoa

Solenoide balbula Volt

L (mm)

YBZ5-E0.5W1T2/UVTAP2

12VDC

0.8KW

3500RPM

0.5ml / r

16MPa

1L

12VDC

308

YBZ5-E0.63W1T2/UVTAP2

0.63ml / r

YBZ5-E0.5Y2T2/UVTBP2

24VDC

0.5ml / r

24VDC

YBZ5-E0.75Y2T2/UVTBP2

0.75ml / r

YBZ5-E1.0W2T2/UVTBP2

1.0ml / r

Ikontsulta
  

Izena eman eta aurreztu!Mezu elektroniko esklusiboak eta denbora mugatuko deskontu bereziak