+ 86 18761016003-

Dock Palankarako potentzia unitateak

Hemen zaude : Hasiera >Produktuen >Potentzia Hidraulikoko Unitateak >Dock Palankarako potentzia unitateak

  • /img/dock_lever_power_units1.jpg

Dock Lever Power Unitateak1

  • Deskribapena
  • Parametroak eta izaera
  • Kontsulta

This power unit is designed exclusively for the dock leveler, consisting of high pressure gear pump, DC motor, multi-functional manifold, valves and tank, etc. Once the ramp is fully lifted,the liprises automatically Both lowering movements are activated by the solenoid valves with speeds adjusted by the throttles.

Ohar Bereziak

1. Potentzia-unitatea S3 betebeharra da, tarteka bakarrik lan egin daitekeena, hau da, minutu 1 piztuta eta 9 minutu itzalita.

2. Garbitu osagai hidrauliko guztiak potentzia-unitatea muntatu aurretik.

3. Viscosity of the hydraulic oil shoud be 15-68 cst, whichshould also be clean and free of impurities N46 hydraulic oil is recomme nded.

4. Check the oil level in the tank after the first start of the power unit.

5. Change the oil after the first 100 hours of running the power unit, then change the oil every 3000 hours.

Eskemaren dimentsioa

Parametroak eta izaera

Model

Motor Volt

Solenoide balbula Volt

Motor Power

Abiadura nominala

Desplazamendua

Sistemaren presioa

Tank aforoa

L (mm)

YBZ5-E2.1B4E10/LBABT1

380VAC

24VDC

0.75KW

1450RPM

2.1ml / r

16MPa

5L

542

YBZ5-E2.7B4E10/LBABT1

2.7ml / r

14MPa


Ikontsulta
  

Izena eman eta aurreztu!Mezu elektroniko esklusiboak eta denbora mugatuko deskontu bereziak