Potenca Unueco Por Duobla Tondilo-Levilo1

Equipped with the zero leakage double-check solenoid valves, this power unit fulfils the complete separation of the two independent circuits, which are respectively for the main platform and subordinate platform of the double scissors lift Two cut-off valves are used for lowering the maching manually in case of power failure. By increasing the number of the solenoid vavles, it is easy to get more independent circuits, which are used to control the corresponding cylinders.

Specialaj Notoj

1.The power unit is of S3 duty,which can only work intermittentlyand repeatedly,ie.,1minute on and 9 minutes off.

2.Clean allthe hydraulic parts concemed before mounting the powerunit.

3.Viscosity of the oil shoud be 15-68 cst,and the oil should be cleanand free of impurities,N46 hydraulic oil is recommended.

4.This power unit should be mounted vertically.

5.Check the oil level in the tank after the initial run of the power unit.

6. Ŝanĝado de oleo necesas post la komencaj 100 operaciaj horoj, post-sekcioj unufoje ĉiun 3000 horojn.

Ekstera Dimensio