- Parameters and character
- Inquiry
This hydraulic power pack integrates gear pump, AC motor, multifuctional manifold, cartridge A normally open so・lenoid valve makes the ramp and lip float with the carriage during loading and unloading, which also offers an emer-gency stop function while falling.
Special Notes
1. The power unit is of S3 duty, which can only be worked intermittently, ie., 1 minute on and 9 minutes off.
2. Clean all the hydraulic parts concerned before mounting the power unit.
3. Viscosity of the hydraulic oil shoud be 15-68 cst.which should also be clean and free of impurities.N46 hydraulic oil is recomme nded.
4. Check the oil level in the tank after the initial operation of the power unit.
5. Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
Outline Dimension
Parameters and character
Model |
Motor Volt |
Solenoid Valve Volt |
Motor Power |
Rated Speed |
Displaceme nt |
System Pressure |
Tank Capacity |
L(mm) |
YBZ5-E2.1A4E81/LBABT1 |
380VAC |
24VDC |
0.75KW |
1450RPM |
2.1ml/r |
16MPa |
3.5L |
457 |
YBZ5-E2.7B4E8VLBABT1 |
2.7ml/r |
14MPa |
6L |
557 |