+86-18761016003

Pallen Truck Power Unit

Du er her : Hjem >Produkt >Hydrauliske kraftenheder >Pallen Truck Power Unit

  • /img/pallet_truck_power_unit2.jpg

Palletruck Power Unit2

  • Beskrivelse
  • Parametre og karakter
  • Forespørgsel

Consisting of high pressure gear pump,Low noise DC motor,multi-functional manifold,valves,tank,ect. This power unit can be widely used in the industry of logistic devices such as minifork lift ect.The lowering movement is controlled by the solenoid valve with the speed controlled by the balance valve.

Særlige bemærkninger

1 .This power unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.

2. Rengør alle de pågældende hydrauliske dele før montering af motorenheden

3. Viscosity of the hydrciulic oil shoud he 15-68 cst,which should also be clean and free of impurities.N46 hydraulic oil is recommended.

4. Denne strømenhed skal monteres lodret.

5. Check the oil level in the tank after the first star of the power unit.

6.Oil changing is required after the initial 100 operation hours,after-wards once every 3000 hours.

Outline dimension

Parametre og karakter

Model

Motor volt

Motoreffekt

Nominel hastighed

Deplacement

Systemtryk

Tank Kapacitet

Magnetventil Volt

L (mm)

YBZ5-E0.5W1T2/UVTAP2

12VDC

0.8KW

3500RPM

0.5ml / r

16MPa

1L

12VDC

308

YBZ5-E0.63W1T2/UVTAP2

0.63ml / r

YBZ5-E0.5Y2T2/UVTBP2

24VDC

0.5ml / r

24VDC

YBZ5-E0.75Y2T2/UVTBP2

0.75ml / r

YBZ5-E1.0W2T2/UVTBP2

1.0ml / r

Inquiry
  

Tilmeld dig og gem!Eksklusive e-mail-tilbud og specialtilbud med begrænset tidsrabat