+ 86-18761016003

Pogonska jedinica za palete

Ti si ovdje : POČETNA >Proizvod >Hidraulički agregati >Pogonska jedinica za palete

  • /img/pallet_truck_power_unit2.jpg

Pogonska jedinica za palete 2

  • Opis
  • Parametri i karakter
  • istraga

Consisting of high pressure gear pump,Low noise DC motor,multi-functional manifold,valves,tank,ect. This power unit can be widely used in the industry of logistic devices such as minifork lift ect.The lowering movement is controlled by the solenoid valve with the speed controlled by the balance valve.

Posebne napomene

1 .This power unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.

2. Očistite sve dotične hidraulične dijelove prije postavljanja pogonske jedinice

3. Viscosity of the hydrciulic oil shoud he 15-68 cst,which should also be clean and free of impurities.N46 hydraulic oil is recommended.

4. Ova jedinica za napajanje treba biti postavljena vertikalno.

5. Check the oil level in the tank after the first star of the power unit.

6.Oil changing is required after the initial 100 operation hours,after-wards once every 3000 hours.

Outline Dimension

Parametri i karakter

model

Motor Volt

Snaga motora

Nominalna brzina

premještanje

Sistemski pritisak

Kapacitet spremnika

Elektromagnetski ventil Volt

L (mm)

YBZ5-E0.5W1T2/UVTAP2

12VDC

0.8KW

3500RPM

0.5ml / r

16MPa

1L

12VDC

308

YBZ5-E0.63W1T2/UVTAP2

0.63ml / r

YBZ5-E0.5Y2T2/UVTBP2

24VDC

0.5ml / r

24VDC

YBZ5-E0.75Y2T2/UVTBP2

0.75ml / r

YBZ5-E1.0W2T2/UVTBP2

1.0ml / r

Iupit
  

PRIJAVITE SE I UŠTEDITE!Ekskluzivne ponude putem e-pošte i ponuda sa ograničenim vremenskim popustima

Upitna korpa
praznoistraga