+ 86-18761016003

Krageenheid vir storting van vragmotors

Jy is hier : Tuis >Produk >Hidrouliese krag eenhede >Krageenheid vir storting van vragmotors

  • /img/power_unit_for_dumping_truck_covering.jpg

Krageenheid vir storting van vragmotors

  • Beskrywing
  • Parameters en karakter
  • ondersoek

Used to operate a double action cylinder of the dumping truckcovering mechanery,this power unit consists of high pressure gearpump,DC motor,multi-functional manifod,valves and oil tank,ect.The opening and closing actions of the covers are controlled by asolenoid directional valve,while the speed is adjusted by the throttles.

Spesiale aantekeninge

1.The duty of this power unit is S3,i.e.,30 seconds on and 270seconds off.

2. Reinig alle betrokke hidrouliese onderdele voordat u die krageenheid monteer.

3.Viscosity of the hydraulic olil shoud be 15-68 cst,which shouldalso be clean and free of impurities.N46 hydraulic oil isrecommended.

4.The power unit should be mounted horizontally.5.Check the oil level in the tank after the initial running of thepower unit.

6.Change the oil after the first 100 hours of running the powerunit,then change the oil every 3000 hours.

Oorsig Dimensie

Parameters en karakter

model

Motor volt

Motorkrag

Nominale snelheid

Verplasing

Stelsel Druk

tenk se kapasiteit

L (mm)

YBZ-F1.6A1W8/1

12VAC

1.5KW

2500RPM

1.6 ml / r

18MPa

3.5L

448

YBZ-F2.5B2A8/1

25VAC

2KW

2.5 ml / r

5L

463

Inavraag
  

Teken in en bespaar!Eksklusiewe e-posaanbiedinge en spesiale aanbiedings vir afslag op tydskorting